Changing a drivelock password – HP EliteBook 2540p Notebook PC User Manual
Page 131
Changing a DriveLock password
To change a DriveLock password in Computer Setup, follow these steps:
1.
Turn on the computer, and then press
esc
while the “Press the ESC key for Startup Menu” message
is displayed at the bottom of the screen.
2.
Press
f10
to enter Computer Setup.
3.
Use a pointing device or the arrow keys to select Security > DriveLock Password, and then press
enter
.
4.
Use a pointing device to select an internal hard drive.
– or –
Use the arrow keys to select an internal hard drive, and then press
enter
.
5.
Use a pointing device or the arrow keys to select the password you want to change.
6.
When prompted, type your current password, and then press
enter
.
7.
When prompted, type a new password, and then press
enter
.
8.
When prompted, type the new password again to confirm, and then press
enter
.
9.
To save your changes and exit Computer Setup, click Save, and then follow the on-screen
instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press
enter
.
Your changes go into effect when the computer restarts.
Using passwords 119