HP Netserver L Server series - Manual (Page 77)

71
8 Rack Mounting the HP Netserver
(4-Post)
Introduction
This chapter provides the instructions for mounting the HP Netserver in a 4-post
(column) HP System/E or System/U or third-party rack. The illustration below
shows the characteristics of the System/E and System/U racks. If you have the
older HP Systems rack, see Chapter 13, "Alternative Rack Mounting (4-post)," for
instructions. If you are mounting the Netserver in a 2-post non-HP rack, refer to
Chapter 7, "Rack Mounting the HP Netserver (2-Post)," or see the documentation
in the appropriate rack accessory kit.