HP Netserver L Server series - Manual (Page 66)

Chapter 7 Rack Mounting the HP Netserver (2-Post)
60
A
B
C
Characteristics of
2-Post Rack:
A. Column is U-shaped for
easy access.
B. Top is secured to
ceiling to hold
additional weight.
C. Base is bolted to floor.
Figure 7-1. Features of 2-Post Rack
NOTE If you want to mount your Netserver in a third-party rack not
mentioned in this guide, you may find relevant documentation
on HP's web site at the following URL:
http://www.hp.com/netserver/support
Before mounting the Netserver, determine the Netserver's location in the rack
relative to other rack components. The HP Netserver LP 1000r rack mounting kit
only requires one EIA unit of space in the rack. Proper placement is vital both for
safety and operating efficiency. For more information, refer to "Rack
Configuration Tools" later in this chapter.