HP Netserver L Server series - Manual (Page 45)

Chapter 5 Installing Additional Boards
39
NOTE Refer to the Readme file, Tested Products List, or
Configuration Advisor on your HP Netserver Navigator
CD-ROM for helpful information about a particular PCI board
type.
64-Bit PCI Slot (1) Riser Board (not shown)
I C
Connector
2
System Board (top view)
Figure 5-2. PCI Accessory Board Slot
NOTE Refer to "System Board Layout" in the Appendix A,
"Specifications," for connections not shown in Figure 5-2.
7. Lift and rotate the securing clamp up to about a 45 ° angle. See Figure 5-3.
The securing clamp holds the riser board in place and helps secure the PCI board.