HP Netserver L Server series - Manual (Page 72)

Chapter 7 Rack Mounting the HP Netserver (2-Post)
66
b. If you are mounting the HP Netserver as a center mount, you only need
the flush mount brackets to mount to the Netserver chassis. Leave the
original front mounting brackets to provide a connection for the front
bezel. See Figure 7-3.
6. Mount the two flush mount brackets on the Netserver chassis using the four
screws provided for each one. See Figure 7-4.
Figure 7-4. Mounting Flush Mount Brackets
7. If required, mount the center mount brackets on the Netserver chassis using
the four screws provided for each one. See Figure 7-5.