HP Netserver L Server series - Manual (Page 36)

Chapter 4 Installing Additional Memory
30
0
1
3
2
DIMM
SLOTS
System Board (top view)
Figure 4-2. DIMM Locations on System Board
7. Choose an empty slot on the system board to install a DIMM.
DIMMs may be installed in any combination, in any slot, but HP recommends
starting at slot 0 and filling the slots in order with the largest size first: DIMM slots
0, 1, 2, and 3.
8. Spread the two retaining latches on the slot outward. See Figure 4-3.