HP StoreEver Ultrium Tape Drives - Manual (Page 20)

Figure 5 Decision tree for connecting an internal tape drive to an internal SAS port
.
Mounting requirements
You need one industry-standard, 5¼-inch, half-height bay in which to install the HP StorageWorks
Ultrium tape drive.
For many servers, no mounting tray or rails are required. Devices simply slide into the server's chassis
and are fixed with screws. Other servers have built-in trays or rails. Rail kits for a number of
industry-standard servers may be available. For more details refer to:
http://www.hp.com/go/connect .
Some servers use non-standard mounting rails and do not include spares. If this is the case with your
system, you will have to order these accessories from the server manufacturer before you can install
the tape drive.
Installing an internal Ultrium tape drive 20