HP StoreEver Ultrium Tape Drives - Manual (Page 13)

1 Before you start
In this chapter:
• “ Your HP StorageWorks tape drive ” on page 13
• “ Refer to www.hp.com/go/connect ” on page 14
• “ Which operating systems are supported? ” on page 14
• “ Power specifications ” on page 14
• “ How do I connect the drive to my server? ” on page 14
• “ Using the HP StorageWorks Tape CD-ROM ” on page 16
Your HP StorageWorks tape drive
This guide describes how to install and operate the following HP StorageWorks Ultrium tape drives:
• HP StorageWorks LTO-5 Ultrium 3000 internal and external tape drives
• HP StorageWorks LTO-4 Ultrium 1760 internal and external tape drives
• HP StorageWorks LTO-3 Ultrium 920 internal and external tape drives
• HP StorageWorks LTO-2 Ultrium 448 internal and external tape drives
For a detailed product specification, please refer to our World Wide Web site ( http://www.hp.com/
go/tape ).
5. Tape LED 1. Cartridge door
6. Drive LED 2. On/Off switch (external drives only)
7. Ready LED 3. Encryption LED (only on Ultrium 3000 tape drives)
8. Eject button 4. Clean LED
Figure 1 Front view of Ultrium external tape drive
.
Ultrium Half-Height SAS Tape Drives 13