HP Matrix Operating Environment Software - Manual (Page 43)

managing the HP P9000 Device groups. Each HP P9000 Continuous Access Software Storage
Replication Group configured in Matrix recovery management will be managed by one HP P9000
RAID Manager Software instance at each site.
Suggested actions:
There is no workaround for this issue.
CLX/HP P9000 software must be installed on a separate Windows system
A separate Windows system other than the Central Management Server (CMS) should be configured
with CLX/HP P9000, and compatible HP P9000 RAID Manager Software, to manage the various
HP P9000 Device groups to be included in a Matrix recovery management configuration.
Suggested actions:
There is no workaround for this issue.
One Active Matrix recovery management configuration operation at any point in
time
If multiple users attempt to run configuration operations in Matrix recovery management, only one
operation will succeed. All other configuration operations will receive an error message indicating
that some other configuration operation is in progress.
Suggested actions:
There is no workaround for this issue.
Site delete operation in Matrix recovery management does not remove HP SIM tools
If HP P9000 Continuous Access Storage Management Servers are configured and if a site delete
operation is performed, the HP SIM tools used to manage HP P9000 storage replication on the
local Storage Management Server will not be deleted.
Suggested actions:
The mxtool command can be run manually to remove the HP SIM tools. The names of the tools
are Insight Recovery_Failover and Insight Recovery_Group validation. For
example, if the name of the Storage Management Server is stgmgmtA.cup.hp.com then the
names of the tools will be STGMGMTA_CUP_HP_COM_Insight Recovery_Failover and
STGMGMTA_CUP_HP_COM_Insight Recovery_Group validation
.
Minor issues 43