HP Matrix Operating Environment Software User Manual
Page 14

User Defined storage adapter interface specification
The following three commands are defined in the User Defined storage adapter interface
specification:
•
validatesms.cmd
— validates a Storage Management Server during configuration.
•
validatesrg.cmd
— validates a Storage Replication Group during configuration.
•
failoversrg.cmd
— fails over a Storage Replication Group while Recovery Group activation
occurs.
Command line arguments:
•
For validatesms.cmd
sms_name=
sms_username=
•
For validatesrg.cmd
sms_name=
sms_username= Local Site> srg_name= local_storage_id= Local Site> remote_storage_id= Remote Site> NOTE: Volumes in the Storage Replication Group (identified by srg_name) are replicated between the local storage system (identified by local_storage_id) and the remote storage • For failoversrg.cmd local_sms_name= Site> local_sms_username= the Local Site> local_storage_id= Local Site> remote_sms_name= Site> remote_sms_username= the Remote Site> remote_storage_id= Remote Site> srg_name= use_non_current_data= NOTE: A value of yes requires the Storage Replication Group to be failed over even in cases where the data at the destination site may not be current. A value of no requires storage 14 Installing and configuring Matrix recovery management
system (identified by remote_storage_id)
failover to fail if the data at the destination is not current.