Configuring data rates, Configuring – ADC 320F User Manual
Page 30
Configuring ADSL Service
22
Megabit Modem 310F and 320F User Manual
Configuring Data Rates
You configure the minimum and maximum data rates for both upstream and downstream traffic.
The maximum data rates determine the rate the modem must achieve to come up when the
startup option is set to Fixed Rate (see
).
1
Configure the upstream data rates (transmission toward the Megabit Modem 310F):
a
From the
ADSL Configuration Menu
(
), type
to select (
Max) Up Data Rate
.
The following message displays:
Enter valid input
b
Type a maximum upstream data rate, in kbps, then press
.
The valid data rate values are increments of 32 between 64 and 928 kbps. If you enter
a value that is not an increment of 32, the modem automatically adjusts it to the closest
increment of 32. The default is 928 kbps.
c
Type
to select (
Min) Up Data Rate
.
The following message displays:
Enter valid input
d
Type a minimum upstream data rate, in kbps, then press
.
The valid data rate values are increments of 32 between 64 and 928 kbps. If you enter
a value that is not an increment of 32, the modem automatically adjusts it to the closest
increment of 32. The default is 64 kbps.
2
Configure the downstream data rates (transmission toward the Megabit Modem 320F):
a
From the
ADSL Configuration Menu
(
), type
to select (
Max) Down Data Rate
.
The following message displays:
Enter valid input
b
Type a maximum downstream data rate, in kbps, then press
.
The valid data rate values are increments of 32 between 64 kbps and 7040 kbps. If you
enter a value that is not an increment of 32, the modem automatically adjusts it to the
closest increment of 32. The default is 7040 kbps.
You can configure the data rate only from the Megabit Modem 310F for both the
Megabit Modem 310F and 320F. The data rate fields are
Read Only
Parameters
when you access them from the Megabit Modem 320F (ATU-R).
2
ENTER
4
ENTER
3
ENTER