Configuring the interleave options, Saving adsl configuration changes – ADC 320F User Manual
Page 33
Chapter 4: Configuring the Modems
Megabit Modem 310F and 320F User Manual
25
Configuring the Interleave Options
Use the interleave option to increase impulse noise immunity. The delay is in milliseconds for
both the Up and Down Interleave Options (upstream and downstream traffic).
1
From the
ADSL Configuration Menu
), type
to select
Up Interleave Option
.
2
Press the
to toggle to the interleave value you want, then press
.
The available options are 0, 2, 4, 8 and 16 msec. The recommended interleave delay is
4 msec, to achieve maximum transmission rates with adequate noise immunity. The
default is 4.
3
Type
to
select
Down Interleave Option
.
4
Press the
to toggle to the interleave value you want, then press
.
The available options are 0, 2, 4, 8 and 16 msec. The recommended interleave delay is
4 msec, to achieve minimum latency with adequate noise immunity. The default is 4.
Saving ADSL Configuration Changes
After you make changes to ADSL configuration from the
ADSL Configuration Menu
you must either accept or not accept these changes before you can return to
ADSL Menu
(
).
1
When you finish making changes to ADSL configuration, type
or
to exit the
ADSL Menu
.
The following prompt displays:
Save current settings (Y/N)?
2
Type
to save the changes you made or type
to not save the changes you made.
You return to the
ADSL Menu
.
It is important to note that an increase in impulse noise immunity causes an
increase in delay.
A
SPACEBAR
ENTER
B
SPACEBAR
ENTER
M
R
Y
N