ADC 320F - Manual (Page 27)

Chapter 4: Configuring the Modems
Megabit Modem 310F and 320F User Manual 19
3 If you typed to restore factory default settings, you must press the several
times to display the Logon screen. Then, log on to the modem(s).
Disabling or Enabling the RS-232 Port For the Megabit Modem 320F
You can enable or disable the RS-232 port for the Megabit Modem 320F from the
Megabit Modem 310F management interface. The screen option is
ATU-R Login and the default
setting is Enabled .
1 From the System Configuration menu, type to select a new ATU-R Login option. (When the
RS-232 port status is ENABLED , it changes to DISABLED after typing .)
2 Press to confirm the new ATU-R Login option for the RS-232 port. The new option
displays to the right of ATU-R Login .
The ATU-R Login option displays for the remote modem only when you are
logged on to the Megabit Modem 310F (ATU-C).
The current status of the Megabit Modem 320F RS-232 port (enable or disable)
displays to the right of the
ATU-R Login option.
Y SPACEBAR
5
5
07/20/99 PAIRGAIN TECHNOLOGIES 05:14:24
ATU-C ADSL MEGABIT MODEM TERMINAL v 1.0
SYSTEM CONFIGURATION
1. CHANGE SYSTEM TIME
2. CHANGE SYSTEM DATE
3. CHANGE PASSWORD
4. FACTORY DEFAULT CONFIGURATION
5. RT LOGIN
(R)eturn (M)ain
ENTER CHOICE-->
DISABLED
Press RETURN to confirm, ESC to cancel
ENTER