HP PCIe U320 SCSI Host Bus Adapter - Manual (Page 29)

Sync Rate (MB/s) Choices: Sync DT IU (320, 160), Sync DT (160, 80, 40), Sync ST WIDE
(80, 40, 20, 10), Sync ST Narrow (40, 20, 10, 5)
Default: Sync DT IU 320.
If synchronous transfers are enabled, the sync rate specifies the maximum rate
at which host bus adapter negotiates with the selected target ID. Set the rate
to the maximum value supported by the host adapter. If excessive SCSI errors
occur, you have long cables, or there are many devices on the bus, you
might want to reduce the Sync Rate value. Slowing the transfer rate may
increase the reliability of the SCSI bus.
Wide Transfers Choices: Disabled, Enabled
Default: Enabled
Specifies whether the initiator negotiates wide data transfers. If the parameter
is disabled, narrow data transfers are negotiated. Wide Transfers is
automatically set to Enabled when the Sync Rate specifies a DT rate. The
DT sync rates must have wide data transfers.
User guide 29