beautypg.com

Installing the atto configuration tool, 4 configuration tool – HP PCIe U320 SCSI Host Bus Adapter User Manual

Page 25

background image

4 Configuration tool

The HP StorageWorks U320e SCSI Host Bus Adapter ships with the latest firmware installed and

configuration set to work in most installations. Use the ATTO Configuration Tool to see information about

installed adapters, drivers and devices, and change NVRAM settings on the adapter.
This program executes under:

Windows® XP/2000/Server 2003

Linux® 2.4 and 2.6 kernels

The ATTO Configuration Tool displays:

The names of HP StorageWorks U320e SCSI Host Bus Adapters and other ATTO adapters installed in

the system.

Information about the drivers controlling the adapters, including version information for both the

currently executing driver and the flash image.

Information about the devices attached to the HP StorageWorks U320e SCSI Host Bus Adapter and

ATTO adapters

NOTE:

The factory settings on the HP StorageWorks U320e SCSI Host Bus Adapter should provide excellent

performance for a wide range of applications. However, some applications may benefit from

modification of the adapter NVRAM settings that tune the adapter for a specific performance range.

Installing the ATTO Configuration Tool

To install the ATTO Configuration Tool from the product CD:

NOTE:

The version on the product CD may be older than the version on the website. Please check the HP

website for newer versions.

1.

Load the product CD into the computer. The CD will display an HTML page.

2.

Click the arrow next to Utilities in the Extras section.

3.

On Windows, double-click win_app_configtool_308.exe. Follow the instructions in the

installer to finish the installation.

4.

On Linux, double-click lnx_app_configtool_308.bin. If the executable bit is not set, run sh

.

To install the ATTO Configuration Tool from the HP website:

1.

Download the ATTO Configuration Tool from

http://www.hp.com/support/u320e

to your filesystem.

2.

Navigate to the downloaded file.

3.

Double-click the downloaded file to start the installer. Follow the instructions in the installer to finish

the installation.

User guide

25

This manual is related to the following products: