ALESIS ANDROMEDA A6 User Manual

Page 110

Chapter 5: Oscillators and Filters

108

NDROMEDA

A6 R

EFERENCE

ANUAL

Since there is only one front panel knob for

ENV 1

control, the

LIVE

parameter allows

the selection of which oscillators were affected by turning the

ENV1 AMOUNT

knob.

This way you can have one oscillator set to a constant value while the other would be

controlled by the

ENV1 AMOUNT

knob. Or you can have the

ENV1 AMOUNT

knob control

both oscillators. The soft knobs control the

ENV1 AMOUNT

settings regardless of the

LIVE

settings. The

LIVE

setting is only for the

ENV1 AMOUNT

knob on the front panel.

Once you have selected which VCO(s) to modulate by

ENV 1

, use the

ENV 1 (PITCH)

controls on the upper right-hand area of the front panel to adjust the characteristics

of this envelope as it affects the frequency of

OSC 1, OSC 2

or both VCOs. The basics of

envelope operation are provided in Chapter 6.