Asus NCCH-DR User Manual

Page 96

4 - 3 4

C h a p t e r 4 : B I O S s e t u p

Video Off Method [DPMS]

This item determines the video off features. The Display Power
Management System (DPMS) feature allows the BIOS to control the video
display card if it supports the DPMS feature. [Blank Screen] only blanks the
screen. Use this for monitors without power management or “green”
features. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS]

Video Off In Suspend [Yes]

This item determines when to activate the video off feature for monitor
power management. Configuration options: [No] [Yes]

MODEM Use IRQ [3]

Allows you to select the IRQ assignment for the modem.
Configuration options: [NA] [3] [4] [5] [7] [9] [10] [11]

Soft-Off by PWR-BTN [Instant-Off]

When set to [Instant-Off], the system goes to soft off when you press the
power button for l e s s

l e s s

l e s s than 4 seconds. When set to [Delay 4 Sec], press

the power button for m o r e

m o r e

m o r e than 4 seconds to power off the system.

Configuration options: [Instant-Off] [Delay 4 Sec.]

Power On By PCI Devices [Enabled]

Allows you to enable or disable the PME to generate a wake-up event.
Configuration options: [Disabled] [Enabled]

Power On By External Modem [Disabled]

Allows you to enable or disable system power up when the external modem
receives a call while in soft-off mode.
Configuration options: [Disabled] [Enabled]

Power On Function [BUTTON ONLY]

Allows you to select a device to turn the system power on.
Configuration options: [Password] [Hot Key] [Any KEY] [BUTTON ONLY]
[PS/2 Mouse]

KB Power On Password [Enter]

Allows you to set a password to turn the system power on. Highlight this
item then press enter to set a password.

To configure this item, you should set the P o w e r O n F u n c t i o n

P o w e r O n F u n c t i o n

P o w e r O n F u n c t i o n item

to [Password].