LG CF3DAT User Manual
Page 6

Safety Precautions
6
When in Use
Caution
Do not place heavy objects on 
the projector.
It may fall and cause injury.
Be careful not to allow impact to 
the lens during transport.
Do not touch the lens. The lens 
may be damaged.
Miscellaneous
Caution
Cleaning
Caution
You need to clean the projec-
tor periodically.
If you do not clean the projector, 
dust will accumulate inside and 
may create a fire hazard or mal-
function.
When cleaning plastic parts such as the projector case, unplug the power 
first and wipe with a soft cloth. Do not spray with water or wipe with a wet 
cloth. Never use glass cleaner, automobile or industrial shiner, abrasives 
or wax, benzene, alcohol etc., which can damage the projector.
This may create a fire hazard, result in electric shock or product damage (deforma-
tion, corrosion or breakage).
Cleaning
Warning
Do not spray the projector with 
water when cleaning. Make sure 
water does not flow into the pro-
jector.
This may create a fire hazard or cause 
electric shock.
In the unlikely event of smoke or a 
strange smell coming out from the 
projector, switch it off, unplug it 
from the power outlet and contact 
the LG Electronics Service Center.
Otherwise, it may create a fire hazard or 
result in electric shock.
Use an air spray or soft cloth or 
cotton swab moistened with a lens 
cleaning chemical or alcohol to 
remove dust or stains on the front 
projection lens.
Miscellaneous
Warning
Only a qualified technician can disassemble or modify the projector. For diagnosis, adjustment, or repair, con-
tact your seller or service center.
This may create a fire hazard or cause electric shock.
Be sure to unplug if the projector is 
not to be used for a long period.
Accumulated dust is a fire hazard and may 
result in electric shock due to overheating, 
ignition, or poor insulation. 
Do not mix new batteries with 
old ones.
Burst or leaking batteries are a fire 
hazard or may result in electric shock.
Only use the specified type of 
battery. 
Burst or leaking batteries are a fire 
hazard and are toxic.
When in Use
Warning
If there is a gas leak, do not touch the power outlet, and open the win-
dows for ventilation.
Sparks may cause fire or burns.
Always open the lens door and 
remove the lens cap when the 
projector lamp is on.
Do not use any sharp tools on the 
projector such as a knife or ham-
mer, because this may damage the 
casing.
In the event that no image appears 
on the screen, please switch off the 
projector, unplug it from the power 
outlet and contact the LG 
Electronics Service Center. 
This may create a fire hazard or cause 
electric shock.
Do not drop anything onto the 
projector or allow anything to 
impact the projector.
This may cause mechanical failure or 
personal injury.
