LG CF3DAT - Manual (Page 31)

Function
31
Adjusting PC Input
SCREEN
Auto Config.
Position
Resolution ꔃ
Size
Phase
Reset
ꔐ
1024 x 768
1280 x 768
1360 x 768
ꔂ Move ꕉ Prev.
1. Press the MENU button, then go to Screen with the ∧, ∨, ＜, ＞ buttons
and press OK .
2. Press the ∧, ∨ buttons to go to RGB Config. and press OK .
3. Press the ∧, ∨ buttons to select a desired option and press the ＞ button.
4. Press the ∧, ∨, ＜, ＞ buttons to adjust the screen and press OK .
ꔈ Available resolutions are 768 resolution
(1024x768/1280x768/1360x768, 60Hz) and 1050 resolution
(1400x1050/1680x1050, 60Hz).
ꔈ Press the BACK button to exit the menu screen.
Audio Function
&+
ꔦ
A
Multi Audio
English
Adjusting Volume
Adjust the volume by using the VOL ∧, ∨ buttons on the remote control.
ꔈ You can select this function through the MENU button.
ꔈ You can adjust the volume only when a headset is connected. Adjust the volume of an audio receiver if only
SPDIF is connected without a headset.
Stereo/SAP Broadcast Setup
< Analog TV >
1. Press the Q.MENU button on the remote control.
2. Press the ＜, ＞ buttons to move SAP.
3. Press the ∧, ∨ button to select a desired item.
• Press the BACK button to exit the menu screen.
< Digital TV >
1. Press the Q.MENU button on the remote control.
2. Press the ＜, ＞ buttons to move Multi Audio.
3. Press the ∧, ∨ button to select a desired item.
• Press the BACK button to exit the menu screen.
* On analog signals, this projector can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompa-
nies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broad-
cast is only in Mono.
&+
ꔦ
A
SAP
Stereo