LG CF3DAT User Manual
Page 37
Function
37
OPTION
Menu Language
: Korean
Audio Language
Caption :
Text
1
Blank Image
: Blue
Camera Calibration
Lamp Mode
: Normal
High Altitude
Network Setting
Set ID
:
On
ꔂ Move ꔉ OK
1.
Press the MENU button, then go to OPTION with the
∧, ∨,
＜, ＞ buttons and press OK .
2.
Press the
∧, ∨ buttons to go to Network Setting and press
OK
.
3.
Press the
＜, ＞ buttons to select On for LAN option.
4.
Press the
∧, ∨ buttons to go to IP Auto Setting or IP Manual Setting and
press OK
.
ꔈ Select IP Auto Setting for a server PC.
ꔈ Select IP Manual Setting for an ordinary PC.
- PC Setup: Set the Internet Protocol (TCP/IP) of the PC at your own discretion.
Projector Setup: Set the IP Address as the same IP Address format of the PC, and
select Close after entering the same gateway as the PC. Please
refer to the eZ-Net Manager Guide for details of network settings.
:: Example::
IP Address
Subnet Mask
Gateway
PC
192.168.0.10
255.255.255.0
192.168.0.1
Projector
192.168.0.254
255.255.255.0
192.168.0.1
ꔈ If Network Setting is not working, check your network status and the LAN cable connection.
ꔈ If Network Setting is not completed, network functions may not work properly.
ꔈ IP Auto Setting: Select this if there is a DHCP (Dynamic Host Configuration Protocol) server on the local area network
(LAN) via a wired connection; the projector will automatically be allocated an IP address. It may not be
possible to connect to DHCP if a firewall is installed or depending on the model of the computer.
IP Manual Setting: Select IP Manual Setting if there is no DHCP server on the network and you want to set the IP address
manually.
ꔈ Press the BACK button to exit the menu screen.
Connect the LAN port of the projector to the LAN
port of the PC or router using a LAN cable.
LAN cable
Connecting to a PC
Close
IP Auto Setting
IP Manual Setting
Network does not exist.
Do you want to reset?
LAN
ꔗ Off ꔃ
<IP Manual Setting>
IP Address
ꔌ
1
9 2 1 6 8 0 0 0 2 5 4
ꔍ
Subnet Mask
2 5 5 2 5 5 2 5 5 0 0 0
Gateway
1 9 2 1 6 8 0 0 0 0 0 1
Close
ꔁ Move ꔉ OK