LG CF3DAT - Manual (Page 19)

Connecting Device
19
Connecting to a Video Player
Connect the projector's VIDEO port to the audio/video
device's output jack using a video cable.
Video Cable
Connecting to a DVD Player
Connect the projector's COMPONENT IN port to the
DVD player's output port using a component cable.
* Match the jack colors to the component cable when connect-
ing. (Y=Green, P B =Blue, P R =Red)
1. Connect the projector's HDMI IN 1 (or HDMI IN 2) port
to the DVD player's HDMI port using an HDMI cable.
2. Set the DVD player's resolution to one of the following:
480p, 720p, 1080i, or 1080p.
Turn on the projector, then turn on the HDMI device.
* The output jack Y, P B or P R of the DVD player may be marked as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, or Cr depending on the model.
Component Cable
Component Cable
Connecting to a DTV Set-Top Box
1. Connect the projector's HDMI IN 1 (or HDMI IN 2)
port to the DTV set-top box's HDMI port using an
HDMI cable.
2. Set the DTV's resolution to one of the following:
480p, 720p, 1080i, or 1080p.
Turn on the projector, then turn on the HDMI device.
* Please refer to the user manual of the DTV set-top box to connect to the projector, as well as for instructions on how to use the
DTV set-top box.
Connect the projector's COMPONENT IN port to the DTV
set-top box's output port using a component cable.
* Match the jack colors to the component cable when connect-
ing. (Y=Green, P B =Blue, P R =Red)
HDMI Cable
HDMI Cable
or