Acer 330 - Manual (Page 53)

Chapter 2 53
The following table describes the parameters in this screen. Settings in
boldface are the default and suggested parameter settings.
Note: If your system has ACPI, all power management functions are
taken care of by Windows .
Parameter Description Options or Format
Advanced Power
Management Mode Enables or disables
Advanced Power
Management (APM) mode Disabled, Enabled or
time values
Turn Off Display Sets the time-out value
before the display enters
power saving mode. Disabled or time
values
Turn Off Hard Disk Sets the time-out value
before the hard disk enters
power saving mode. Disabled or time
values
System Standby Sets the time-out value
before the computer enters
Standby mode. Disabled or time
values
System Hibernation
After Standby Sets the time-out value
before the computer enters
Hibernation mode. Disabled or time
values
System Resume
Timer Mode When enabled and the
system resume date and
time are valid, the computer
resumes (wakes up) at the
set time and date. Disabled or Enabled
DD/MM/YYYY (day/
month/year)
HH:MM:SS
(hour:minute:second)
Battery-low Warning
Beep Enables or disables warning
beeps during a battery-low
condition Enabled or Disabled
Sleep Upon Battery-
low Enables or disables the
hibernation function during a
battery-low condition
When the computer is very
low on battery power, the
computer will enter
hibernation mode if Sleep
Manager is installed, active
and the hibernation file is
valid.
Enabled or Disabled