Canon imagePROGRAF iPF8400S - Manual (Page 45)

iPF8400S Basic Guide
45
C
ons
uma
bles
a
nd
M
ain
te
na
nc
e
C
ut
te
r
Un
it
Cutter Unit
Cutter Unit ...................................................................................................................................................... 45
Replacing the Cutter Unit ............................................................................................................................... 45
Cutter Unit
When purchasing, check the Model number.
Shape Model number
CT-06
Note
• For instructions on Cutter Unit replacement, see "Replacing the Cutter Unit."➔P.45
Replacing the Cutter Unit
Compatible Cutter Units
For information on compatible cutter units, see "Cutter Unit."➔P.45
Access the menu for cutter unit replacement
1 On the Tab Selection screen of the Control
Panel, press
◀ or ▶ to select the Settings/Adj.
tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2 Press the OK button.
The Set./Adj. Menu is displayed.
3 Press ▲ or ▼ to select Maintenance, and then press the OK button.
4 Press ▲ or ▼ to select Change Cutter, and then press the OK button.
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.