Canon LV-8320 - Manual (Page 41)

VIDEO Input
41
VIDEO Input
Image select Menu
Image Mode Selection
Remote controller
IMAGE button
Select the desired image mode among
Presentation, Standard, High contrast,
Cinema, Blackboard (Green), Colorboard,
User 1, User 2, User 3 and User 4 by pressing
the IMAGE button on the remote controller.
Standard
Picture mode with improved halftone for
graphics.
High contrast
Blackboard (Green)
User 1-4
For the image projected on a blackboard.
This mode helps enhance the image projected
on a blackboard. This is mainly effective on a
green colored board, not truly effective on a
black colored board.
Presentation
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset image mode in
the Image Adjust Menu (p. 43).
1
2
Menu Operation
Colorboard
At the time of simple projection on the colored
wall, you can get the close color image to the
color image projected on a white screen by
selecting the similar color to the wall color from
the preset four colors.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Image select and then
press the Point ► button or the OK button.
Use the Point ▲▼ buttons to select the
desired item and then press the OK button.
Picture mode adjusted with fine tone.
Cinema
IMAGE button
Presentation
High contrast
User 1
User 2
User 3
User 4
Blackboard(Green)
Standard
Colorboard
Cinema