Canon LV-8320 - Manual (Page 38)

38
VIDEO Input
Choose VIDEO or S-VIDEO by pressing the
INPUT button on the top control, or the VIDEO or
the S-VIDEO button on the remote controller.
Before using these buttons, correct input source
should be selected through menu operation as
described below.
1
2
VIDEO
Input Source Selection (VIDEO, S-VIDEO)
Direct Operation
S-VIDEO
 Note:
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will
be searched automatically (p.47).
Remote controller
VIDEO button
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select Input and then press the Point ►
button or the OK button.
Use the Point ▲▼ buttons to select VIDEO
or S-VIDEO, and then press the OK button.
S-VIDEO button
VIDEO
S-VIDEO
Menu Operation
When video input signal is
connected to the S-VIDEO jack,
select S-VIDEO.
INPUT button
Top Control
When video input signal is
connected to the VIDEO jack,
select VIDEO.
VIDEO