Canon LV-8320 - Manual (Page 27)

Basic Operation
27
Basic Operation
Remote controller Operation
Using the remote controller for some frequently used operations is advisable. Just pressing one of the
buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER 1/2, HDMI, VIDEO,
S-VIDEO and COMPONENT buttons on the
remote controller to select the input source. See
pages 29, 39 for details.
COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and
COMPONENT buttons
FREEZE button
Display the input source information: Input,
H-sync freq., V-sync freq., Screen, Language,
Lamp status, Lamp counter, Power
management mode, Key lock, PIN code lock,
Remote control and SERIAL NO. and Total
power savings. (p.61)
INFO. button
Press the D.ZOOM buttons on the remote
controller to enter to the Digital zoom +/– mode.
See page 37 for details.
D.ZOOM buttons
Remote controller
 Note:
See the next page for the description of other
buttons.
LAMP button
COMPUTER 1/2
buttons
Press the LAMP button on the remote controller
to select the lamp mode for changing the
brightness on the screen.
Press the FREEZE button on the remote
controller to freeze the picture on the screen,
meanwhile, volume is muted. To cancel the
Freeze function, press the FREEZE button again
or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
FREEZE
button
D .ZOOM
buttons
VIDEO
button
LAMP button
INFO. button
S-VIDEO
button
COMPONENT
button
Auto.......Brightness according to the input
signal.
Normal..Normal brightness
Eco 1.....70%-80% of the normal brightness.
Eco 2.....50% of the normal brightness.
HDMI button