Cop y – Canon VIXIA HF R42 User Manual
Page 147
Additional Information
147
[Zoom Position at Startup]:
Allows you to choose the position of the zoom
when you turn on the camcorder.
[Full Wide Angle]: The zoom position will be at full wide angle.
[Last Used Position]: The zoom position will be at the same position it was
the last time you used zoom.
• When this function is set to [Full Wide Angle] and you manually adjust
the focus, the focus will be lost and autofocus will be activated the next
time you turn on the camcorder.
[Focus Assistance]:
When focus assistance is activated, the image at the
center of the screen is magnified to help you focus manually (A 81).
• Using focus assistance will not affect the recordings. It will be cancelled
automatically after 4 seconds or when you start recording.
• This function is available when the shooting mode is set to
,
or
.
• This function is available only for recording movies.
[Auto Slow Shutter]:
The camcorder automatically uses slow shutter
speeds to obtain brighter recordings in places with insufficient lighting.
• Minimum shutter speed used: 1/30; 1/12 when the frame rate is set to
[»]; 1/15 when it is set to [½].
• This function is available when the shooting mode is set to
, but
the setting will not change even if you set the shooting mode to
.
• If a trailing afterimage appears, set the slow shutter to [j Off].
[Flicker Reduction]:
If the screen starts to flicker when recording movies
under fluorescent lights, change the setting to reduce the effect.
[Face Detection &
Tracking]
[
i On
}
], [
j Off]
[Auto Backlight
Correction]
[
i On], [j Off]
[Auto Slow Shutter]
[
i On], [j Off]
–
[Flicker Reduction]
[
j Off], [: 50 Hz], [; 60 Hz]
–
[Image Stabilizer]
[
Dynamic], [
Standard], [
j Off]
[Intelligent IS]
[
È With È], [
Without
È]
[Video Snapshot
Length]
[C 2 sec], [D 4 sec], [F 8 sec]
Menu item
Setting options
A
SCN
COP
Y