Canon PowerShot ELPH 330 HS - Manual (Page 135)

135
1
2
3
4
5
6
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Auto Mode/Hybrid
Auto Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover
Advanced Guide
7
Setting Menu
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When
the camera is not in use, the screen quickly darkens to reduce battery
consumption.
1 Configure the setting.
z z Choose [Eco Mode], and then choose
[On].
X X [ ] is now shown on the shooting
screen ( = 162).
X X The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2 Shoot.
z z To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed ( = 26).
z z Choose [Power Saving], and then press
the < m> button.
z z After choosing an item, press the
< q> buttons to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
• These power-saving functions are not available when you have set Eco mode
( = 135) to [On]. COP
Y