Cop y – Canon PowerShot ELPH 330 HS User Manual
Page 119
119
1
2
3
4
5
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Camera Basics
Auto Mode/Hybrid
Auto Mode
Other Shooting
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover
Advanced Guide
6
Wi-Fi Functions
Checking Your Wi-Fi Environment
To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access
point must be connected to a computer. Be sure to use a Wi-Fi base unit
that conforms to the Wi-Fi standard listed in “Specifications” (
If you are already using Wi-Fi, confirm the following items and mark each
one on the Check sheet. For instructions on checking network settings,
refer to the access point user guide.
•
If system administrator status is needed to adjust network settings,
contact the system administrator for details.
•
These settings are very important for network security. Exercise
adequate caution when changing these settings.
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Network certificate/data encryption (encryption method/
encryption mode)
The method for encrypting data during transmission via
Wi-Fi.
ONone
OWEP (open system
authentication)
OWPA-PSK (TKIP)
OWPA-PSK (AES)
OWPA2-PSK (TKIP)
OWPA2-PSK (AES)
Encryption key (network key)
The data encryption key used for transmission via Wi-Fi.
Key index (sent key)
The key specified when using WEP for Network certificate/
data encryption.
O 1
•
A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
•
This guide refers to all Wi-Fi routers and base stations as “access points”.
•
If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing the [
3] tab, [Wi-Fi Settings], and then [Check MAC
Address].
COP
Y