Cop y – Canon PowerShot ELPH 330 HS User Manual
Page 12
12
1
2
3
4
5
6
7
8
9
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Auto Mode/Hybrid
Auto Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Cover
Basic Guide
•
To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
•
For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
•
For details on charging time and the number of shots and recording time
possible with a fully charged battery, see “Number of Shots/Recording Time,
•
Charged batteries gradually lose their charge, even when they are not used.
Charge the battery on (or immediately before) the day of use.
•
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery.
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
1
Check the card’s write-protect
tab.
z
z
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2
Open the cover.
z
z
Slide the cover ( ) and open it ( ).
3
Insert the battery.
z
z
While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
z
z
If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
inserted.
Terminals
Battery
Lock
COP
Y