Canon REALiS SX80 Mark II D - Manual (Page 62)

62
Selecting Screen Aspect and Aspect
Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection making best use of the screen size.
• [Screen aspect]: Select the same aspect ratio with your screen.
• [Aspect]: Select [Auto] unless the type of input signal is [VIDEO].
You may need to change the setting depending on the resolution of the computer. If the
image is not projected with a desired aspect ratio, see "Relationship between Aspect and
Screen Aspect" in Appendix on page
147 .
Selecting Screen Aspect
Select the aspect ratio of projecting image to the aspect ratio of the screen.
Perform the following steps to select the aspect ratio of the projecting image.
1
Press the MENU button to display a menu window.
2
Use [<] / [>] to select the [Display settings] tab.
3
Select [Screen aspect] with [ ] / [ ], and then press the OK button.
Remote control Top control
Remote control Top control
<
<
Remote control Top control