Canon REALiS SX80 Mark II D - Manual (Page 28)

Part Names
28
Top Control
KEYSTONE button
Corrects keystone distortion. (
P60 )
[ ] [ ]: For keystone adjustment.
Press KEYSTONE and then AUTO SET to
adjust the keystone automatically.
• Moves the image up and down when
the D. image shift is selected. ( P64 )
• [ ] [ ]: Adjust the vertical position.
<
<
<
<
MENU button ( P76 )
Displays a menu on the screen.
AUTO SET button ( P53 )
Performs input signal setting,
keystone distortion adjust-
ment, focusing (SX80 II), and
screen color correction (SX80
II) automatically.
FOCUS button ( P59 )
Adjusts focusing.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
In SX80 MarkII, press FOCUS and
then AUTO SET to adjust the focus
automatically.
<
<
ZOOM button ( P58 )
Adjusts the image size.
[ ] [ ]: For rough adjust-
ment.
[<] [>]: For fine adjustment.
<
<
OK button ( P78 )
Determines the item se-
lected from the menu.
INPUT button ( P55 )
Switches among input signals.
WARNING lamp ( P138 )
Flashes red when a problem has been
detected on the projector.
POWER button/lamp ( P49 , P68 )
Turns the projector on or off.
Green: The projector is on.
Flashing green: The projector is be-
ing turned on.
Red: The projector can be turned on.
Flashing red: The projector is being
turned off (the lamp is being cooled).
Pointer/VOL button ( P77 , P71 )
Adjusts the sound volume.
[<]: Decreases the volume.
[>]: Increases the volume.
Selects the upper, lower, left or
right item in the menu.
AUTO PC button ( P57 )
Adjusts tracking and so on automatical-
ly in accordance with signal from a
computer when ANALOG PC-1 or ANA-
LOG PC-2 is selected.
LED illumination lamp ( P106 )
Indicates the projector status with LEDs.
Blinking from the left: The projector is being turned on.
Blinking from the right: The projector is being turned off.
Middle LED flashing slowly: The image is being blanked out.
Left and right LEDs flashing slowly: The image is freezing.