Canon REALIS WUX10 MARK II D - Manual (Page 34)

Setting Up the Projector
34
■Placing on a Level Place
Be sure to keep the projector as horizontal as possible.
If you need to point the projector up (for example, when the screen is placed on a higher
position), follow the instruction given in "When Pointing the Projector Up" on the following
page.
• Adjust the tilt of the projecting image using the rear adjustable foot.
Ceiling Mounting or Rear Projection
You can mount the projector on the ceiling (Ceiling mounted) with it turned up side
down or place it behind the screen (Rear) if you use a translucent screen. For ceil-
ing mounting or rear projection, you have to invert the projected image. (
P83 )
Ceiling Mounting Rear Projection
Make sure that the installation position is free
from any obstacle that may block the exhaust
vent on the right side of the projector and the air
intake vent on the bottom of the projector.