Canon REALIS WUX10 MARK II D - Manual (Page 136)

136
Specifications
■Projector
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteris-
tics of the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
■Remote Control
Model name WUX10 MarkII
Display system RGB liquid crystal system
Optical system
Color separation by dichroic mirror/polarizing beam splitter and color composition by
prism
Di
splay
dev
ice
Type Reflective liquid crystal panel
Size/Aspect ratio 0.71" x 3/16:10
Drive system Active matrix system
Number of pixels/Total Number of pixels 2,304,000 (1920 x 1200) x3 panels/6,912,000
Pr
oj
ect
io
n
len
s
Zoom ratio/Focal length/F value 1.5/f=21.8 to 31.9mm/F1.85 to F2.65
Zooming and focusing system Electronic operation/electronic operation (with auto focusing function)
Lens shift 10:0 (fixed)
Light source 275W high-pressure lamp
Screen size (projection distance) 40" to 300" (1.2m/3.9' to 9.1m/12.8')
Number of producible colors 16,770,000 colors (full color)
Brightness* 3200 lm (at presentation)
Contrast ratio 1000:1 (full white:full black, at presentation)
Uniformity* 88% (at presentation)
Speaker 1W monaural x 1
Maximum input resolution 1920 x 1200 dots
V
ideo sign
al
s ANALOG PC input
WUXGA/WSXGA/WXGA/UXGA/SXGA+/SXGA/XGA/SVGA/VGA
(scan rate: horizontal: 15 to 75KHz, vertical 50 to 85Hz)
DIGITAL PC input WUXGA/WSXGA+/WSXGA/UXGA/SXGA+/SXGA/XGA/SVGA/VGA
COMPONENT input 1080p, 1080i, 1035i, 720p, 576i, 576p, 480i, 480p
HDMI input 1080p, 1080i, 720p, 576p, 480p
VIDEO input NTSC, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
In
put t
e
rm
inals
DVI-I IN terminal DIGITAL PC, ANALOG PC-1 (DVI-I connector 29-pin)
HDMI IN terminal HDMI ver. 1.3 (10-bit deep color)
ANALOG PC-2/COMPONENT IN terminal ANALOG PC-2, COMPONENT (mini D-sub 15-pin)
VIDEO IN terminal
Composite (RCA)
CONTROL terminal RS-232C (D-sub 9-pin)
Audio Input terminal Audio signal (stereo mini jack x 3)
Audio Output terminal Audio signal (stereo mini jack)
LAN terminal Network connection (RJ-45)
In
p
u
t signa
ls
Digital PC TMDS (Transition Minimized Differential Signaling)
Analog PC
0.7Vp-p, positive polarity, impedance = 75
Ω
Horizontal/vertical synchronization: TTL level, negative or positive polarity
Composite synchronization in G signal: 0.3Vp-p, negative polarity, impedance=75
Ω
Video
Video:1Vp-p, negative synchronization, impedance = 75
Ω
Component: Separate Y Cb/Pb Cr/Pr signal
Y: 1Vp-p, Negative synchronization, impedance = 75 Ω
Cb/Pb: 0.7Vp-p, impedance = 75
Ω Cr/Pr: 0.7Vp-p, impedance = 75Ω
Audio 142mVrms, impedance = 47 K Ω or more
Noise (normal mode/silent mode) 36/32dB
Operating temperature 5 °C to 35 °C
Power supply AC 100-240 V 50/60 Hz
Power consumption (normal mode/silent
mode/standby state)
400W/330W/8W (when the network function is off)
Dimensions 284 (W) x 114 (H) x 336 (D) mm/11.4 (W) x 4.6 (H) x 13.4 (D) in (excluding protrusions)
Weight 5.0 kg/11.02lbs
Accessories
Remote control, batteries for remote control, power cord, computer connection
cable, component cable, carrying bag, lens cover, string for lens cover, User's Man-
ual, and Warranty Card.
Power supply Two 3.0 V, AAA-size batteries
Operating range About 5 m (16.4') (to infrared remote receiver)
Dimensions 42 (W) x 22 (H) x 135 (D) mm / 1.7 (W) x 0.9 (H) x 5.3 (D) in
Weight (not including batteries) 55 g