Canon REALIS WUX10 MARK II D - Manual (Page 111)

111
Setting Network
Co
nnecting the Projector
to Netwo
rk
4
If the SMTP mail server authentication is required, click [Mail auth], enter appropriate
values in the following field, and click the [OK] button.
Select one of the following four authentication method in [Mail authentication]. Select
[OFF] if the mail authentication is not required (the factory default is [OFF]).
[LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)],
[USER/PASS (POP before SMTP)], [APOP (POP before SMTP)]
Setting items:
[User name]:
The user name for the mail authentication
[Password]: The password for the mail authentication
[Confirm password]: The password for confirmation
[POP3 server IP address]: The IP address of the POP3 server
[POP3 server port number]: The port number of the POP3 server
(The factory default: 110)
[POP before SMTP response time]: The wait time between the POP3 authentication and
the transmission to the SMTP mail server
(millisecond, the factory default: 300)