Canon DP-V3010 - Manual (Page 43)

43 OSD Menu
Marker Settings
This menu is used to configure various markers.
Item Setting Options (underline indicates factory default)
Marker Preset Customizes markers which are assigned to markers 1 to 5.
Marker 1 to 5
Aspect Marker An aspect marker displays a range in accordance with the specified aspect ratio.
Note
Aspect marker is not displayed in the following cases:
• When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is
selected
• When "H Delay"/"V Delay" is "On"
• When a "Test Pattern" is displayed
Enable Switches the aspect marker On, Off.
On, Off
Mask Switches the mask color. Mask is the blanking area outside the range of the marker.
Black:
Half (50% gray):
Off: Turns mask off.
Aspect Ratio Sets the aspect ratio of the aspect marker.
16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable
The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments). The
grayed out slider becomes active and can be used to set the aspect ratio.
1.00:1 to 3.00:1 (1.78:1)
Line Active when "Black" or "Half" is selected for "Mask". Switches lines on mask On, Off.
On, Off
Line Width Sets the thickness of the aspect marker line.
Thick, Normal, Thin
COP
Y