Canon DP-V3010 - Manual (Page 42)

42 OSD Menu
Item Setting Options (underline indicates factory default)
Scaling Method Sets the interpolation method when "Screen Scaling" is set to "200%" or "Automatic".
Shape Trace: Canon original processing that produces smooth slopes with reduced jagged lines.
Bicubic: General interpolation process that uses neighboring pixel information to create interpolated
pixels.
Nearest Neighbor: Process that uses nearest neighbor pixel information to create (copy) new
pixels. This is useful as it enlarges the original pixels, thus making any jagged lines visible.
Note
• When "H Delay"/"V Delay" is "On", "Scaling Method" is not performed.
I/P Conversion Sets the interlaced signal I/P conversion method ( 70).
Image Priority: This mode gives priority to image quality. Processing time will be longer than "Speed
Priority".
Speed Priority: This mode gives priority to speed.
PsF Defines how the PsF signal is displayed ( 70).
Progressive: Interpolates giving preference to image quality by detecting paired fields.
Interlace: Interpolates using two adjacent fields giving priority to speed.
Note
• When "PsF" is set to "Interlaced", "I/P Conversion" is fixed to "Image Priority".
Film Cadence Sets the film cadence mode ( 70).
2-2: Displays progressive image after conversion for 2-2 pulldown processed interlaced signal input.
2-3: Displays progressive image after conversion for 2-3 pulldown processed interlaced signal input.
2-3-3-2: Displays progressive image after conversion for 2-3-3-2 pulldown processed interlaced
signal input.
Off: Does not perform film cadence mode progressive conversion.
Note
• This can be set only during interlace signal input and when "I/P Conversion" is set to "Image
Priority".
COP
Y