Using the function (f) buttons, Cop y – Canon DP-V3010 User Manual
Page 25

25
Operating the Display Controller
Temporarily Saving Parameters (Anchor Point Setting)
Temporarily saves parameters while adjusting SHARPNESS, CHROMA, BRIGHTNESS, and CONTRAST allows you to
bring those parameters back at any time.
1. Press the MENU button to open the OSD menu (
2. Select "Adjustment" with the
buttons and press the SET button.
The selection frame moves to sub menu.
3. Select " Anchor Adjustment" with the
buttons and press the SET button.
When the confirmation screen appears, select "OK". The parameter is saved and sets anchor point.
4. After readjusting the image quality, press the RESET button above the relevant adjustment on the display
controller.
Press the RESET button above the relevant adjustment to return to each saved anchor point.
Current adjustment value
Anchor Point
Note
• When selecting "Reset" under "Adjustment" or "Reset All Settings" under "System Settings", any saved anchor points are
discarded and the settings return to their factory default values.
Using the Function (F) Buttons
You can assign functions to the F buttons on the display controller to execute them instantly.
1. Press the MENU button to open the OSD menu.
2. Select "System Settings"→"Display Controller Function" and press the SET button.
A new window opens and displays button names F1 to F10.
3. Select a button name with the
buttons and press the SET button.
The selection frame moves to next OSD menu level.
4. Select the function to assign with
.
See "Display Controller Function" (
50) for the available functions.
5. Press the SET button.
The setting is confirmed.
Reference
• You can also assign functions to buttons F1 to F4 on the main unit. Select "Display Function" in step 2 (
COP
Y