Canon EOS C500 PL - Manual (Page 54)

Recording Video
54
• By default, [w Other Functions] > [Fan] is set to [Automatic] and the internal cooling fan will be activated
during record pause mode. While recording, when the camera's internal temperature goes below a
predetermined level, the cooling fan will deactivate. You can also set the cooling fan to be activated at all
times.
• When recording MXF clips, the following apply.
- You can use [w Other Functions] > [Rec Review] (A 104) to review part or all of the last clip recorded.
- If you set an assignable button to [Add $ Mark] or [Add % Mark] (A 111), you can press the button to
add an $ mark or % mark to the last clip recorded.
- You can use [w Other Functions] > [Delete Last Clip] (A 177) to delete the last clip recorded. However,
you cannot delete the last clip if double slot recording is on.
Remote Operation Using Wi-Fi Remote
After completing the necessary preparations (A 49) you can start and stop recording from a Wi-Fi-enabled
device using the Wi-Fi Remote application.
1 Press [LIVE VIEW ON/OFF] to show the camera’s live view image on the Wi-Fi Remote screen.
2 Press [START/STOP] to begin recording.
• The recording operation indicator changes from [STBY] to [ÜREC], the center of the START/STOP button
lights up in red and the time code display starts running on the Wi-Fi Remote screen.
• Press [START/STOP] again to pause the recording.
Recording operation
Time code
COP
Y