beautypg.com

Before use (continued), Handling discs, Cleaning discs – Aiwa XD-DV520 User Manual

Page 6: Storing discs, Handling the unit, Cleaning the unit

background image

6

ENGLISH

Handling discs

Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get
on the surface.
Do not stick paper or tape on the disc.

Cleaning discs

Fingerprints and dust on the disc can cause poor picture
quality and sound distortion. Before playing, clean the disc
with a clean cloth. W ipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine,
thinner , commercially available cleaners, or anti-static spray
intended for analog records.

BEFORE USE (CONTINUED)

Storing discs

After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat,
or leave it in a parked car exposed to direct sunlight, as
there may be a considerable temperature increase inside
the car .

Handling the unit

When shipping the unit

The original shipping carton and packing materials come
in handy . For maximum protection, re-pack the unit as it
was originally packed at the factory

.

When setting the unit

The picture and sound of a nearby

TV, VCR, or radio may

be distorted during playback. In this case, position the unit
away from the TV, VCR, or radio, or turn of f the unit after
removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray

, near

the unit. Do not leave rubber or plastic products in contact
with the unit for a long period of time.

They will leave marks

on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty

,

use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner , as these might damage the surface of
the unit.

To obtain a clear picture

The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality will be poor

.

Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your

Aiwa dealer .