Aiwa XD-DV520 - Manual (Page 21)

ENGLISH
21
BASIC OPERA
TIONS
En
When the menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
Use the j / l / f / g buttons to select the title/chapter
you want to view , then press OK c to start playback.
Press TOP MENU or MENU to return to the menu screen.
To stop playback
Press s .
To turn the power off
Press POWER on the remote control. The unit enters power
standby mode and the
6 STANDBY indicator turns red.
If the unit is left for 20 minutes without any
operations
The unit automatically enters standby mode.
NOTE
The disc continues to spin while the menu screen is
displayed. When you are finished using the unit, turn the
power of f after pressing
s .
Still (Pause)
Press a during playback.
To return to normal playback
Press OK c .
You can also press a to return to normal playback.
Frame advance
Press a during pause.
Each time you press the button, the program advances one
frame. There is no audio during Frame Advance playback.
To return to normal playback
Press OK c .
Resuming playback
The unit remembers the point where you stopped the disc
and you can resume playback from that point.
Press OK c in stop mode.
To clear the resume point
Press s again after you stop the disc.
The resume point is also cleared when you press z OPEN/
CLOSE to open the disc tray , or POWER to turn the power
off.
CONTINUE