Aiwa XD-DV520 - Manual (Page 28)

28
ENGLISH
Mark search
Playback can restart from the marked point.
Up to 10 points can be marked within the same disc.
To mark a desired point
1
Press MARK at the desired point
during playback.
The picture enters the pause mode and the following screen
appears.
2
Press j/l to select the desired mark
number.
3
Press g and then OK c.
The point is memorized.
To start play from the marked point
1
Press MARK during playback.
2
Press j/l to select the desired mark
number.
3
Press OK c.
Playback resumes from the selected marked point.
NOTES
• Mark search may not work with multi-angle scenes or
portions where subtitles are recorded.
• All the marked points are cleared when the power is
turned of f or the disc tray is opened and closed.
SEARCH (CONTINUED)