Brother PT-2100 - Manual (Page 62)

60
Resetting the P-touch
MAINTAINING YOUR P-touch
You can reset the internal memory of your P-touch when you want to clear all saved
label files, or in the event the P-touch is not working properly.
Turn off the machine and then while holding down and , press to
turn the machine back on. Finally, release and .
The P-touch turns on with the internal memory reset.
Your P-touch should be cleaned on a regular basis to maintain its performance and life
span.
Cleaning the Main Unit
Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult to remove marks.
Cleaning the Print Head
Streaks or poor quality characters on printed
labels generally indicates that the print head is
dirty. Clean the print head using a cotton swab or
optional print head cleaning cassette (TZ-CL4).
Resetting the P-touch
1
Release the key before releasing the other keys.
All text, format settings, option settings and stored label files are cleared when you reset the
P-touch. Language and unit settings will also be cleared.
Maintenance
Always remove the batteries and disconnect the AC adaptor before cleaning the P-touch.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the
case or damage the appearance of your P-touch.
Refer to the instructions provided with the print
head cleaning cassette for directions on how to use
it.
WARNING
Do not touch the print head directly with your
bare hands. The print head maybe hot.
Print head