Feeding tape, Feed & cut, Feed only – Brother PT-2100 User Manual
Page 24: Feed & cut feed only
22
Feeding Tape
GETTING STARTED
Feed & Cut
The Feed & Cut function feeds 23 mm of blank tape then cuts the tape, which may be
needed when installing a new tape cassette.
Hold down the
key and press the
key.
"Feed & Cut?" appears on the display.
Select "Feed & Cut" using the or , and then press the
or to feed the
tape.
The message "Feeding Tape... Please wait" appears while the tape is fed, and
then the tape is cut.
Feed Only
The Feed Only function feeds 23 mm of blank tape, which may be needed when using
Fabric Tapes or Strong Adhesive Tapes.
After printing, remove the tape cassette from the machine and use scissors to cut the
tape.
Hold down the
key and press the
key.
"Feed & Cut?" appears on the display.
Select "Feed Only" using the or , and then press the
or to feed the
tape.
The message "Feeding Tape... Please wait" appears while the tape is fed.
Feeding Tape
1
2
Press
while "Feed & Cut?" is displayed to cancel tape feeding.
1
2
Press
while "Feed & Cut?" is displayed to cancel tape feeding.