Brother PT-2100 - Manual (Page 17)

1
2
3
4
5
6
7
8
9
15
z
GE
T
T
ING
S
T
AR
TE
D
Power Supply
AC Adaptor
Insert the plug on the AC adaptor cord into the connector marked DC IN 9-9.5V
on the P-touch.
Insert the AC adaptor plug into a standard electrical outlet.
Remove the batteries if you do not intend to use the P-touch for an extended period of time.
1
2
• Turn the P-touch off before disconnecting the AC adaptor.
• Do not pull or bend the AC adaptor cord.
For backup of memory when the AC adaptor is unplugged from the P-touch, please use AA-size
alkaline batteries (LR6).
WARNING
• Use only the AC adaptor (AD-24) designed exclusively for your P-touch. Failure to
observe this may result in an accident or damage. Brother shall not assume any
responsibility for any accident or damage resulting from not using the specified AC
adaptor.
• Do not connect the AC adaptor to a non-standard electrical outlet. Failure to
observe this may result in an accident or damage. Brother shall not assume any
responsibility for any accident or damage resulting from not using a standard
electrical outlet.
CAUTION
• Disconnect the AC adaptor from the P-touch and electrical outlet when you do not
intend to use the P-touch for an extended period.
• When power is disconnected for more than two minutes, all text and format settings
will be cleared. Any text files stored in the memory will also be cleared.