Installing the printer driver – Brother HL-2170W User Manual
Page 73
Wireless configuration for Macintosh
®
using the Brother installer application (For HL-2170W)
66
5
Installing the printer driver
5
Improper Setup
DO NOT try to cancel any of the screens during this installation.
If your wireless settings fail, an error message will appear during the installation of the printer driver and the
installation will be terminated. If you encounter this failure, please go back to step 1 and setup the wireless
connection again.
a
The driver installation starts.
Follow the on-screen instructions. Then, restart your Macintosh
®
.
For Mac OS
®
X 10.2.4 to 10.2.8 users: Go to step d.
For Mac OS
®
X 10.3 or greater users: Go to step b.
b
The Brother software will search for the Brother printer. During this time the following screen will appear.
Note
• If more than one printer is available, the following list appears. Choose the printer you wish to connect,
and then click OK.
• If there is more than one of the same printer model connected on your network, the Ethernet address
(MAC address) will be displayed after the model name.
•
You can find your printer’s Ethernet address (MAC address) by printing out the Printer Settings Page. See