Brother HL-2170W - Manual (Page 49)

Wireless configuration for Windows ® using the Brother installer application (For HL-2170W)
42
4
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the Name
(SSID) and the Channel number, and then click Next.
m If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to o.
n If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless printer, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Authentication Method and Encryption Mode from the pull-downs in each setting box. Then enter the
Network key and Confirm Network Key, and then click Next.