Brother HL-2170W - Manual (Page 118)

Driver Deployment Wizard (Windows ® only)
111
14
„ Setting the IP Address
If the printer does not have an IP address, the Wizard will allow you to change the IP address by
selecting the printer from the list and by selecting the Configure IP option. A dialogue box then
appears which allows you to specify information such as the IP address, subnet mask and also the
gateway address.
e
Choose the printer driver if you wish to install.
„ If the printer driver you wish to use is installed on your computer:
Check the box of Currently installed drivers and choose the printer you wish to install, and then click
Next.
„ If the driver you wish to use is not installed on your computer:
Click Have Disk and then specify the path of the printer driver.
f
Click Next after you choose the correct driver.
g
Check Yes if you want to install the Interactive Help feature and then click Next.