Brother MFC-640CW - Manual (Page 74)

4 - 4 SETUP RECEIVE
Setting Toll Saver (Msg Ctr mode)
When you set the toll saver feature, the machine answers after four
rings if you do not have voice or fax messages and after two rings if
you do have voice or fax messages. This way, when you call the
machine for remote retrieval and let it ring three times, you know you
have no messages and can hang up to avoid a toll charge.
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 2 , 1 , 1 .
3
Press ▲ or ▼ to select Toll Saver.
Press Menu/Set .
4
Press ▲ or ▼ to select On (or Off).
Press Menu/Set .
5
Press Stop/Exit .
■
When Toll Saver is On, it overrides your Ring Delay setting.
(See Setting the Ring Delay on page 4-3.)
■
The Toll Saver feature is available only when the Message
Center is set to On.
■
If you are using Distinctive Ring, do NOT use the Toll Saver
feature.
Ring Delay
Toll Saver