Brother MFC-640CW - Manual (Page 35)

INTRODUCTION 1 - 10
Handling and using special paper
■
Store paper in its original packaging, and keep it sealed. Keep the
paper flat and away from moisture, direct sunlight and heat.
■
The coated side of glossy paper is shiny. Avoid touching the
shiny (coated) side. Load glossy paper with the shiny side facing
down.
■
Avoid touching either side of transparencies because they
absorb water and perspiration easily, and this may cause
decreased output quality. Transparencies designed for laser
printers/copiers may stain your next document. Use only
transparencies recommended for inkjet printing.
Do not use paper:
■
that is damaged, curled, wrinkled, or irregularly shaped
■
that is extremely shiny or highly textured
■
that was previously printed by a printer
■
that cannot be arranged uniformly when stacked
■
that is made with a short grain
0.08 in.
(2 mm)
or longer
0.08 in.
(2 mm)
or longer